
No. 57 Stone Specs: Size, Gradation, and Weight per Yard
Building in Blount or Knox County? We sell RCA #57 stone (recycled concrete) and virgin #57 for drainage and backfill. Pickup at our Maryville yard or delivery. Call (865) 999-0857 for pricing.
See RCA #57 stone →Quick answer: No. 57 stone is clean crushed stone with a nominal size of 1 inch down to the No. 4 sieve (about 3/16 inch). The ASTM C33 / AASHTO M43 gradation says 100 percent passes 1-1/2 inch, 95 to 100 percent passes 1 inch, 25 to 60 percent passes 1/2 inch, 0 to 10 percent passes No. 4, and 0 to 5 percent passes No. 8. Virgin #57 weighs about 1.4 to 1.5 tons per cubic yard. Our recycled RCA #57 stone weighs about 1.35 tons per cubic yard and is screened to roughly 3/4 to 1 inch.
This post is the spec sheet. If you want to know which jobs #57 is good for, read what #57 stone is used for. If you want the big picture on every size number, read aggregate sizes explained.
What does "No. 57" actually mean?
It is a size designation, not a measurement. The number comes from a standard table of coarse aggregate sizes used in ASTM C33 (concrete aggregates), AASHTO M43, and ASTM D448. Each size number points to a set of sieve limits.
Two-digit numbers like 57 and 67 are blends. Size No. 57 overlaps size No. 5 and size No. 7, which is roughly where the name comes from. You do not need to remember that. You only need to know that "57" means a specific band of sieve results, and any supplier or DOT using the term is pointing at the same table.
People also call it #57 stone, 57 gravel, No. 57, 3/4 inch clean, and 3/4 inch washed. Same product family.
What is the #57 stone gradation?
Here is the standard size No. 57 gradation from ASTM C33 / AASHTO M43:
| Sieve size | Opening (approx.) | Percent passing |
|---|---|---|
| 1-1/2 in | 37.5 mm | 100 |
| 1 in | 25.0 mm | 95 to 100 |
| 1/2 in | 12.5 mm | 25 to 60 |
| No. 4 | 4.75 mm (about 3/16 in) | 0 to 10 |
| No. 8 | 2.36 mm (about 3/32 in) | 0 to 5 |
"Percent passing" is the share of the sample, by weight, that falls through a screen of that size.
What does that gradation mean in plain words?
Read the table top to bottom:
- Nothing bigger than 1-1/2 inch. Every piece passes that screen.
- Almost everything is under 1 inch. At least 95 percent passes. A few oversize pieces are allowed.
- A big share sits between 1/2 and 1 inch. Roughly 35 to 75 percent is caught on the 1/2 inch screen.
- Very little is small. No more than 10 percent passes the No. 4 screen and no more than 5 percent passes No. 8.
So #57 is mostly 1/2 to 1 inch pieces with a tail down to about 3/16 inch and almost no dust. That narrow band is what makes it drain. The "3/4 inch" nickname is shorthand for the middle of the pile, not a hard cut.
Our RCA #57 is screened to roughly 3/4 to 1 inch with no fines. It does the same drainage job. It is not tested and certified to a DOT gradation, so if your plans call out a spec, talk to the engineer first.
How does #57 compare to #67, #8, #2, and crusher run?
Short version below. The sizes post has more on each.
| Size | Nominal range | Fines | Main job |
|---|---|---|---|
| #2 | About 1-1/2 to 3 in | None | Large drainage, construction entrances |
| #57 | 1 in to No. 4 | Almost none | Drainage, bedding, under slabs |
| #67 | 3/4 in to No. 4 | Almost none | Concrete and asphalt mixes, drainage |
| #8 | 3/8 in to No. 16 | Almost none | Chip seal, small pipe bedding |
| Crusher run | 3/4 in down to dust | Yes | Compacted base for driveways, pads |
The big split is fines versus no fines. #57, #67, #8, and #2 are "open graded" and drain. Crusher run is "dense graded" and packs hard. Our crusher run vs #57 post covers that choice.
How much does #57 stone weigh?
Weight depends on the rock and on how loose the pile is.
| Material | Tons per cubic yard (approx.) | Pounds per cubic foot (approx.) |
|---|---|---|
| Virgin #57 (limestone, granite) | 1.4 to 1.5 | 104 to 111 |
| RCA #57 (recycled concrete) | 1.35 | 100 |
| Crusher run, compacted | 1.45 to 1.55 | 107 to 115 |
Recycled concrete is a little lighter than quarry stone because old concrete has mortar and air in it. That means a ton of RCA #57 covers slightly more area than a ton of virgin #57. Note: we sell recycled product only. Virgin numbers are here for comparison.
How much area does a ton of #57 cover?
One ton of RCA #57 is about 0.74 cubic yards, or 20 cubic feet.
| Depth | RCA #57 sq ft per ton | Virgin #57 sq ft per ton (approx.) |
|---|---|---|
| 2 in | About 120 | About 108 to 116 |
| 4 in | About 60 | About 54 to 58 |
| 6 in | About 40 | About 36 to 39 |
Going the other way, 100 square feet at 4 inches deep takes about 1.67 tons of RCA #57. Use the gravel calculator for your exact numbers and add about 10 percent for waste. The tons vs cubic yards guide shows the full formula.
What is the void ratio of #57 stone?
Loose #57 has roughly 40 percent void space, give or take a few points depending on particle shape and how it was placed. That means a cubic yard of #57 has about 0.4 cubic yards of open space between the stones.
That number matters two ways:
- Drainage. The voids connect, so water flows straight through. That is why #57 works in French drains, behind walls, and under slabs.
- Storage. A dry well or stone trench can hold water equal to about 40 percent of its volume while the soil around it soaks it up. A 4 ft by 4 ft by 4 ft pit of #57 holds roughly 190 gallons.
Fines kill both. When dirt or dust gets into the voids, flow drops and storage shrinks. That is why drains get wrapped in filter fabric.
Does RCA #57 behave differently from virgin #57?
Mostly no, with a couple of notes:
- Slightly alkaline. Recycled concrete raises the pH of water that runs through it, especially when fresh.
- Early fines and calcium. New RCA can shed a little fine material and leach calcium that can form a crusty white deposit (tufa) over time. Keep it out of direct contact with perforated pipe in critical drains unless the stone is wrapped in fabric or the pipe is bedded in washed stone.
- Lighter and a bit more absorbent. Fine for drainage, backfill, and base. Not what you want in a new concrete mix.
For typical homeowner drainage, wall backfill, pipe bedding, and under-slab layers, RCA #57 does the job. More on the material in what is RCA.
Why do state DOT specs matter for #57?
On public work, the gradation is not a suggestion. TDOT and other state DOTs use these size numbers in their specs, and aggregate has to come from an approved source and pass testing. A road contractor cannot just buy "3/4 clean" anywhere.
For a private job (a house, a shed, a yard drain), nobody is pulling sieve samples. You want clean, angular stone in the right size range.
SMSG is working toward TDOT source approval for our recycled products. We are not an approved source today. If your job requires one, ask the engineer before you order. For private and commercial work without a DOT spec, our RCA #57 is a solid fit. See our note on RAP and TDOT subs for how we work with paving crews.
How to order #57 stone
Tell the yard four things: the size (#57), that you need it clean, how many tons, and whether you are picking up or need delivery.
We make RCA #57 stone on site at 245 Brookdale Rd in Maryville. Pick it up with your own truck or trailer, or schedule delivery. Call (865) 999-0857 for current pricing. Yard hours are Mon-Fri 7 AM to 5 PM and Sat 8 AM to noon. See all products on the aggregate for sale page.
Keep Reading
Frequently Asked Questions
What size is No. 57 stone?
The nominal size range is 1 inch down to the No. 4 sieve (about 3/16 inch). In practice most of the pile is 1/2 to 1 inch pieces, which is why people call it 3/4 inch clean stone.
What is the gradation for #57 stone?
Under ASTM C33 and AASHTO M43 size No. 57: 100 percent passes 1-1/2 inch, 95 to 100 percent passes 1 inch, 25 to 60 percent passes 1/2 inch, 0 to 10 percent passes No. 4, and 0 to 5 percent passes No. 8.
How much does a cubic yard of #57 stone weigh?
Virgin crushed #57 typically runs about 1.4 to 1.5 tons per cubic yard depending on the rock. Our recycled concrete #57 runs about 1.35 tons per cubic yard.
How much area does a ton of #57 stone cover?
A ton of RCA #57 covers about 120 square feet at 2 inches, 60 square feet at 4 inches, and 40 square feet at 6 inches. Virgin #57 covers a little less because it is heavier.
Why does #57 stone drain so well?
It is a narrow band of sizes with almost no fines, so about 40 percent of its volume is open space. Water moves through those connected voids instead of sitting in them.
Is SMSG RCA #57 approved by TDOT?
Not yet. We are working toward TDOT source approval. If a project spec requires a DOT-approved source, check with the engineer before ordering.
Related Guides
Ready to get started?
Serving Blount County, Knox County, and the greater East Tennessee region. Mon-Fri 7am-5pm, Saturday 8am-12pm.