What Is #57 Stone Used For? 10 Uses and Where to Skip It

What Is #57 Stone Used For? 10 Uses and Where to Skip It

← All Posts··9 min read
Note on pricing: Any specific rates in this article were current as of publication. For today's pricing, call the yard at (865) 999-0857.

Building in Blount or Knox County? We sell RCA #57 stone (recycled concrete) and virgin #57 for drainage and backfill. Pickup at our Maryville yard or delivery. Call (865) 999-0857 for pricing.

See RCA #57 stone →

Quick answer: #57 stone is clean crushed stone, roughly 3/4 to 1 inch, with no fines. Because water runs straight through it, the main uses are drainage jobs: French drains, retaining wall backfill, pipe bedding, the gravel layer under concrete slabs, dry wells, and footing drains. It also works as a thin top course on a driveway, but only over a compacted crusher run base. Skip it for walkways, play areas, and any structural base that has to pack hard on its own. We sell the recycled version, RCA #57 stone, at our Maryville yard.

If you need the spec sheet (sieve sizes, weight, coverage), see our post on aggregate sizes. This post is about the jobs #57 is good at, how deep to put it, and where it causes trouble.

What makes #57 stone useful?

Two things: it is clean and it is angular.

  • Clean means no fines. Nothing fills the gaps between the stones, so roughly 40 percent of a pile is open space. Water and air move through it fast.
  • Angular means crushed, not rounded. The faces bite into each other a little, so it holds its shape better than river rock or pea gravel.

That combo is why #57 is the default drainage stone on most job sites. It is also why it does not make a hard surface. No fines means nothing binds the stones together.

What are the most common uses for #57 stone?

Here is the quick reference. Depths are typical residential numbers, not engineering specs. Your plans or your local inspector win if they say something different.

Use Typical depth or amount Notes
French drain / curtain drain Fill a 12 to 24 in deep trench around 4 in perforated pipe Line the trench with filter fabric
Retaining wall backfill 12 in wide zone behind the wall, full height Drain pipe at the base, fabric between stone and soil
Under concrete slabs 4 in typical Capillary break, vapor barrier on top
Pipe bedding 4 to 6 in under pipe, 6 to 12 in over Hand tamp the haunches
Driveway top course About 2 in Only over 4 in or more of compacted crusher run
Shed pad drainage layer 2 to 4 in Over or instead of crusher run, inside a frame
Footing / foundation drains Surround the pipe, 12 in or more above it Fabric wrap recommended
Concrete mix aggregate Mix design Virgin #57 only, not RCA
Dry wells Fill the pit, often 3 to 4 ft deep Fabric on sides and top
Erosion and splash areas 3 to 4 in Downspout outlets, drip lines

Now the details on each.

How is #57 stone used in French drains?

This is the number one use. A French drain is a trench with a perforated pipe in the bottom and clean stone all around it. Water from the soil drops into the stone, finds the pipe, and runs downhill to an outlet.

Typical build: 2 to 3 inches of #57 under the pipe, pipe on a steady slope, then stone to within a few inches of grade. Wrap it all in filter fabric so soil does not wash into the voids. Our French drain aggregate guide walks through trench sizes and stone amounts.

RCA note: fresh recycled concrete is slightly alkaline and can shed a little fine material and calcium in the first months. In a critical drain (a foundation drain, a drain under a building), keep RCA out of direct contact with the pipe by wrapping the stone and pipe in fabric, or bed the pipe in washed stone. For a typical yard drain or downspout line, RCA #57 works fine.

Why does #57 go behind retaining walls?

Water is what knocks walls over. Wet soil behind a wall is heavier and pushes harder. A zone of #57 directly behind the wall gives that water a path down to a drain pipe at the base instead of building up pressure.

Most block wall manufacturers call for about 12 inches of clean drainage stone behind the block, the full height of the wall, with fabric between the stone and the native soil. More in retaining wall backfill and why retaining walls fail.

Can #57 stone go under a concrete slab?

Yes, and it is one of the better uses. A layer of #57 under a slab breaks capillary rise, so ground moisture does not wick up into the concrete. It also drains any water that gets under the slab and gives the concrete an even bed.

A 4 inch layer is the common number. Many builders put #57 over compacted crusher run, or use #57 alone and plate it lightly. The vapor barrier goes on top of the stone, right under the concrete.

Is #57 stone good for pipe bedding?

Yes. Clean angular stone flows under the sides of the pipe (the haunches), supports it evenly, and does not hold water against it. Typical bedding is 4 to 6 inches under the pipe and enough over the top to protect it before regular backfill. See trench backfill and pipe bedding for the full layering.

Can you use #57 stone on a driveway?

As a top layer, yes. As the whole driveway, no.

On its own, #57 behaves like a pile of marbles. Tires push the stones sideways, ruts form in the wheel tracks, and the stone migrates to the edges. It never firms up because there are no fines to lock it in place.

The fix is layering: 4 to 6 inches of compacted crusher run as the base, then about 2 inches of #57 as a top course if you want a cleaner surface that sheds rain. Our crusher run vs #57 post covers this in detail, and the RCA vs river rock vs #57 comparison covers surface options.

What about sheds, foundations, and dry wells?

Shed pads. A frame filled with 4 inches of #57 drains well and keeps the floor framing off wet ground. Crusher run packs harder. Many people do crusher run first and finish with #57. See best gravel for a shed base.

Footing and foundation drains. The perforated pipe along the footing gets surrounded with clean stone so groundwater reaches the pipe instead of the basement wall. This is a critical drain, so fabric wrap matters with any stone, especially RCA.

Dry wells. A pit filled with #57 holds runoff from a downspout and lets it soak into the soil slowly. Line the sides and top with fabric.

Erosion and splash areas. A few inches of #57 at downspout outlets or along a roof drip line stops soil from splashing and washing out. For yards that hold water, see standing water drainage.

Is #57 stone used in concrete?

Yes, virgin #57 is the most common coarse aggregate in ready-mix concrete. That is a job for quarry stone that meets concrete aggregate specs.

Recycled concrete #57 is not what you want in a new concrete mix. It absorbs more water, carries old mortar, and makes mix design harder. We sell RCA #57 for drainage, bedding, backfill, and base work. If you are mixing concrete, buy bagged mix or call a ready-mix plant.

Where should you NOT use #57 stone?

Do not use #57 for Why Use instead
Walkways and paths Rolls underfoot, hard to walk on Compacted crusher run or pavers
Play areas Angular and rough on skin Mulch or play surfacing
Compacted structural base by itself Will not pack tight, can shift Crusher run in compacted lifts
Whole driveway with no base Ruts and migrates Crusher run base, #57 top course
Paver setting bed Too coarse to screed flat Base plus a proper bedding layer

For paver work, see paver patio base materials.

How much #57 stone do you need?

Square feet times depth in feet gives cubic feet. Divide by 27 for cubic yards. Our RCA #57 weighs about 1.35 tons per cubic yard.

Area at 4 in deep Cubic yards RCA #57 tons (approx.)
100 sq ft 1.2 1.7
200 sq ft 2.5 3.3
400 sq ft 4.9 6.7

Add about 10 percent for waste and uneven subgrade. The gravel calculator does the math for any size, and tons vs cubic yards explains the conversion.

Is recycled #57 as good as virgin #57?

For drainage, backfill, bedding, under-slab layers, and driveway top course, RCA #57 does the same job as virgin stone. It is angular, clean, and a little lighter per yard, so a ton covers slightly more area. It keeps concrete out of the landfill and counts as recycled content on projects tracking it. The two places to be careful are concrete mix (use virgin) and direct contact with perforated pipe in critical drains (wrap it). More on the material in what is RCA.

Where to get #57 stone near Maryville and Knoxville

We make RCA #57 stone on site from clean concrete. Pick it up at the yard or get it delivered. We also sell RCA crusher run for the base layers mentioned above. See everything on the aggregate for sale page.

  • Address: 245 Brookdale Rd, Maryville TN 37801
  • Phone: (865) 999-0857, call for current pricing
  • Hours: Mon-Fri 7 AM to 5 PM, Sat 8 AM to noon

Keep Reading

Frequently Asked Questions

What is #57 stone used for?

Mostly drainage. French drains, retaining wall backfill, pipe bedding, the gravel layer under slabs, dry wells, and footing drains. It also works as a 2 inch top course over a compacted crusher run driveway base.

Is 57 gravel the same as #57 stone?

Yes. 57 gravel, #57 stone, No. 57 stone, and 3/4 inch clean stone usually mean the same thing: clean crushed stone around 3/4 to 1 inch with no fines.

Can I use #57 stone by itself for a driveway?

Not as the only layer. With no fines it never locks together, so tires push it around and it ruts. Put down 4 or more inches of compacted crusher run first, then add about 2 inches of #57 on top if you want the look.

Can recycled concrete #57 be used in a concrete mix?

We do not recommend it. Ready-mix plants use virgin #57 that meets concrete aggregate specs. RCA #57 is for drainage, backfill, bedding, and base work, not for mixing new concrete.

Is #57 stone good for walkways or play areas?

No. The angular pieces roll underfoot and are rough on bare skin and knees. Pick a compacted crusher run path or a softer surface made for play areas.

Does RCA #57 work around perforated drain pipe?

For most homeowner drains, yes. In a critical drain, wrap the stone in filter fabric so the pipe is not in direct contact with fresh RCA, which can shed some fines and calcium early on.

57 stone useswhat is 57 stone used for57 gravel#57 stonedrainage stoneRCA #57

Related Guides

Ready to get started?

Serving Blount County, Knox County, and the greater East Tennessee region. Mon-Fri 7am-5pm, Saturday 8am-12pm.

Call Us